Bonded Brick Walls with Plaster

In the pictures below you can see right at the top the brickwork that these 10ml plasterboard sheets have been adhered too. (Using specialist products)

Now the client did not want the added expense of calling in an Electrician or heat pump specialist to remove heat pump from wall.

So in this example we used specialised plastering beads as you can see around heat pump, to still provide a quality finish for the client at a significantly reduced cost, as no electrician was needed to remove heat pump and re-install from wall.

This is not the finished product as 2 x coats of plaster still remain and the cornice is yet to be installed.

But this is something to think about, an alternative that costs you as the client a lot less.

Regards.

Plastering A Skylight

Now this is a skylight. Over 2 metres deep and 1800 wide. Used a special scissor lift to access this space to sheet and trowel. #skylights #hobartplasterer #tasmania

http://www.philthecracks.com

2 layers Fyrcheck

Busy day for the boys from Phil The Cracks. There are 15 x 3 storey units that need to be separated with firewalls. 2 x 13ml fyrcheck plasterboard layers need to be installed on both sides of every dividing wall between each unit. Massive undertaking but as you can see the team is up to the task. The blue seam at the top/sides and bottom is a special Fire retardant so no smoke or flame can penetrate through the firewall thus providing the necessary required time for people to evacuate and the fire brigade to respond. #hardwork #plastering #Tasmanian